DREAM--7-Mk3系列
產品描述
SD卡儲存播放海量節目
SD card can store and play a large number of programs.
獨具尖端科，采用智能手機芯片ARM方案，帶有外置儲存SD卡，具有高記憶容量、快速數據傳輸率、極大的移動靈活性以及很好的安全性，讓你發揮無窮想象力。
We acquire high technology and adopt intelligent chip ARM project with outlaying SD card which has high memory capacity, fast data transfer rate,great moving flexibility and excellent safety, meeting your endless imagination.
FB4控制系統
Powered by Pangolin FB4
內置FB4控制硬件，通過以太網連接，方便使用專業軟件進行遠距離激光效果編程，更加便捷的調試戶外激光工程的整體效果。
The built-in Pangolin FB4 control system can control the laser effect at a longer distance through the connection of the network cable, and more conveniently regulate the overall effect of outdoor laser engineering.
機械式激光安全閘刀
Security protection
當圖案輸出小于±1.5時，能在0.1秒內切斷激光光路。確保不出現激光單點。配合，具備1T高速運算智能單片機芯片，通過復雜的多維運算比較，智能判斷激光束的安全狀況，當圖案輸出小于±1.5°時，就智能關斷激光的激發信號。雙重保護，雙重安全。
When the image outputs less than +/-1.5°, it can turn off the laser light path to make sure not appear laser light spot. With 1T high velocity intelligent chip,through complex arithmetic comparison, it can judge the security of laser beam. When the mage outputs less than +/-1.5° , it can turn off the laser signal, double protection,double security.
獨立三層式設計
Isolated three-layer design
全新精密緊湊機身設計，獨立三層式設計，完美將激光光路、電路控制及散熱風路獨立而分，激光器合光層，硅膠密封，防塵，防水，防煙油。
Totally new design of precise compact design, independent three layers design, perfectly separating laser light path, circuit control and heat radiation. Laser light mixing layer, silica gel sealing, dust-proof, water-proof, oil-proof.
精密三維調節架
Three dimensional adjusting bracket
合光方式采用精密三維調節架，確保激光光斑的質量。
Precise three-dimensional adjusting bracket guarantees the quality of laser spot.
超大散熱面積
Large heat radiator
300cm2 超大散熱面積，確保激光器的熱能交換。百頁窗式進出風口后，內置2對3路高轉速散熱風扇，一吸一出，最有效的將交換熱能帶走。
300cm2 for heat radiation to make sure the heat interchange in laser. Window-shades for ventilating, two sets of high speed heat radiation fan, one for inhaling, one for exhaling, taking away the interchanging heat.
專業戶外防雨恒溫箱（選配）
Professional outdoor rainproof incubator (optional)
內設溫度和濕度傳感器，基于半導體泵浦激光器內部22-23度之間的最佳工作溫度，當多方位傳感器檢測到溫度低于18度時，散熱風扇停止工作，內部加熱絲工作，加熱到20度停止工作；當溫度高于20度或濕度大于70%時，啟動風扇。（參數可根據現場環境手動設定）
Temperature and huity sensor inside, the best working temperature is 22-23°inside of diode-pumped solid-state laser. When sensor detects temperature lower than 18°, the fan will stop work, heater strip will work till the temperature up to 20°; when temperature higher than 20°huity more than 70%, fan will work.(the parameter can be set manually)
效果展示
Product Effects
產品參數
Product parameter
